ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary

ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary

ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary

ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary which was developed based on the format and content of ASCE/SEI 41-06, Chapter 6.0, “Concrete,” describes methods for estimating the seismic performance of both existing and new concrete components in an existing building.

The ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary is intended to be used with the analysis procedures and Rehabilitation Objectives established in ASCE/SEI 41-06 for the Systematic Rehabilitation Method.

This ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary provides recommendations for modeling parameters and acceptance criteria for linear and nonlinear analysis of beams, columns, joints, and slab-column connections of concrete buildings and the procedures for obtaining material properties necessary for seismic rehabilitation design.
Keywords: acceptance criteria; ASCE/SEI 41; beams; columns; frames; joints; modeling parameters; retrofit; seismic rehabilitation; slab-column connections.

Table of Contents ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary

Chapter 1—Introduction and scope, p. 2
1.1—Introduction
1.2—Scope
Chapter 2—Material properties and condition
assessment, p. 3
2.1—General
2.2—Properties of in-place materials and components
2.3—Condition assessment
2.4—Knowledge factor
Chapter 3—General assumptions and requirements, p. 9
3.1—Modeling and design
3.2—Strength and deformability
3.3—Flexure and axial loads
3.4—Shear and torsion
3.5—Development and splices of reinforcement
3.6—Connections to existing concrete
3.7—Rehabilitation: general requirements
Chapter 4—Concrete moment frames, p. 14
4.1—Types of concrete moment frames
4.2—Reinforced concrete beam-column moment frames
4.3—Post-tensioned concrete beam-column moment frames
4.4—Slab-column moment frames
Chapter 5—Notation, definitions, and acronyms,p. 30
5.1—Notation
5.2—Definitions
5.3—Acronyms
Chapter 6—References, p. 33
6.1—Referenced standards and reports
6.2—Cited references

Title : 369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary
Author : ACI Committee 369
Year of Publication : 2011
Number of Pages : 35 Pages
Download Type : PDF File, ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary

ACI 369R 11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary Pdf :


Download PDF File



Tags :